Full-paper Knowledge Units · saved output

Evidence for contact delocalization in atomic scale friction

Gemma 4 12B IT · KU LoRA rank 128 · 500-word source chunks · guarded TranslateGemma 4B back-translation

Complete extractionLongest literal run: 8 words

Source title: Evidence for contact delocalization in atomic scale friction
Source authors: D Abel; S Yu Krylov; J W M Frenken
KU document title: Evidence for contact delocalization in atomic scale friction
KU document author field: Not populated by the original extractor
Style annotation: No dedicated document-style field in this schema
KU sequence: 7 of 7 expected chunks
Attribution provenance: Source registry metadata shown for attribution; not added to the QA context

This condition scores 88.5% (177/200) across all 20 evaluation papers. The example page does not imply that every claim in this individual paper is correct.

Gemma 4 12B IT · KU LoRA rank 128 · 500 words Gemma 4 12B IT · KU LoRA rank 128 · 1,000 words Gemma 4 E4B IT · KU LoRA rank 128 · 500 words Gemma 4 E4B IT · KU LoRA rank 128 · 1,000 words Qwen 3.8 27B FP8 · teacher · 500 words Qwen 3.8 27B FP8 · teacher · 1,000 words

Every saved KU, entity, attribute and relationship is shown below, in original chunk order. Navigation follows the source sequence rather than publication dates. Adjacent summaries are reader navigation, not lookahead supplied to extraction. All KUs were generated before the paraphrasing stage. Download complete factual KU JSON.

Original paper: 10.48550/arxiv.0707.3072

Jump to KU: 1 2 3 4 5 6 7

KU 1 · source words 1–500

6 entities · 10 relationships · 0 preceding KUs available during extraction

Recorded context summary

The text analyzes a two-spring model to explain fine structure in atomic stick-slip motion during Friction Force Microscopy. It demonstrates that tip apex delocalization occurs when the effective tip mass is sufficiently low, causing rapid thermally activated motion. This behavior contrasts with the traditional single-spring model and provides insights into macroscopic friction origins.

two-spring model

method · ID: two_spring_model

components: one real mass (M) and one effective mass (m)
mass_M_definition: combined cantilever and tip inertia
mass_m_definition: bending motion of the tip
purpose: predict nontrivial fine structure in atomic stick-slip motion

Relationships

replaces → single-spring (Tomlinson) model
predicts → fine structure in atomic stick-slip motion

Friction Force Microscopy (FFM)

method · ID: friction_force_microscopy_ffm

sensitivity: nN or pN
tool_status: essential tool for nanotribology
mechanism: atomically sharp tip dragged along surface by external spring

Relationships

models → single asperity behavior
demonstrates → periodic stick-slip behavior

single-spring (Tomlinson) model

method · ID: single_spring_tomlinson_model

effective_mass: close to cantilever mass
effective_spring: accounts for cantilever and tip flexibility

Relationships

traditionally_describes → FFM
fails_in → recent experiments

contact delocalization

concept · ID: contact_delocalization

cause: rapid, thermally activated motion of tip apex between surface potential wells
condition: effective mass m is low enough that jump rate exceeds cantilever-tip characteristic frequency

Relationships

occurs_in → two-mass-two-spring system
results_in → stuck in slipperiness

stuck in slipperiness

concept · ID: stuck_in_slipperiness

cantilever_behavior: usual atomic stick-slip
tip_surface_contact: completely delocalized

Relationships

exhibited_by → two-mass-two-spring system

FFM tip

other · ID: ffm_tip

rigidity: softer than most cantilevers
function: models single asperity

Relationships

part_of → Friction Force Microscopy (FFM)

Source positions, MinHash and extraction warnings

{
  "source": {
    "chunk_index": 0,
    "start_word": 0,
    "end_word": 500,
    "word_count": 500,
    "sha256": "006187bfb8e6e4f27a06092b540426e60024d680c3ffdb8c45e56ccafa46161f",
    "sentence_minhash": [
      138742571471211904,
      132024682887321555,
      259197737023610255,
      37498130448765965,
      42052357859457007,
      234874774536143700,
      149017575652778032,
      22384502142726101,
      193468123599729578,
      107048872566759164,
      78280491562202942,
      77272953743708039,
      157018458019500101,
      132529644835130180,
      303264414993015767,
      658790404649858
    ]
  },
  "extraction_warnings": []
}

Previous KU: Start of paper

Next KU: The text analyzes a two-mass-two-spring system where an ultra-low tip mass leads to contact delocalization and complex slip dynamics. A hybrid Langevin-Monte-Carlo scheme reveals that rapid tip motion is not averaged out by the cantilever, creating distinct observable regimes. These findings explain the 'fine structure' of slip events observed in high-resolution experiments, contradicting the 'multiple nanotips' hypothesis.

KU 2 · source words 501–992

6 entities · 9 relationships · 1 preceding KUs available during extraction

Recorded context summary

The text analyzes a two-mass-two-spring system where an ultra-low tip mass leads to contact delocalization and complex slip dynamics. A hybrid Langevin-Monte-Carlo scheme reveals that rapid tip motion is not averaged out by the cantilever, creating distinct observable regimes. These findings explain the 'fine structure' of slip events observed in high-resolution experiments, contradicting the 'multiple nanotips' hypothesis.

two-mass-two-spring system

other · ID: two_mass_two_spring_system

components: cantilever (M) and tip apex (m)
mass_ratio: m is about 9 to 12 times smaller than M.
model_entity_type: model

Relationships

explains → fine structure of slip events
analyzed_by → hybrid computational scheme

tip apex mass (m)

measurement · ID: tip_apex_mass_m

estimated_value: 10^-20 kg
physical_basis: bending deformation of atomically sharp conical or pyramidal tip associated with few hundred atomic layers

Relationships

exhibits → ultra-fast dynamics
leads_to → contact delocalization

cantilever mass (M)

measurement · ID: cantilever_mass_m

relative_magnitude: 9 to 12 times larger than m

Relationships

reflects → average of ultra-fast dynamics of tip apex

hybrid computational scheme

method · ID: hybrid_computational_scheme

components: numerical Langevin description of cantilever+tip motion and Monte-Carlo treatment of thermally activated motion of tip apex

Relationships

enables → following dynamic interplay between rapid motion of m and slow motion of M
identifies → several different observable regimes

contact delocalization

concept · ID: contact_delocalization

cause: ultra-low effective mass m
effect: unusual slip events with nontrivial fine structure

Relationships

confirmed_by → recent observations [9]

recent observations [9]

event · ID: recent_observations_9

description: high-resolution experiment resolving durations of slip events
previous_explanation: simultaneous contact via several nanotips

Relationships

explained_by → contact delocalization

Source positions, MinHash and extraction warnings

{
  "source": {
    "chunk_index": 1,
    "start_word": 500,
    "end_word": 992,
    "word_count": 492,
    "sha256": "fcc193ed6c49d818ce71582b549922761820fff155851f07e4fa22a3df38a51c",
    "sentence_minhash": [
      14279474218976588,
      1306423125707224,
      102643128469009747,
      89647839879950313,
      2812407903185919,
      37671122015440682,
      76197433036625096,
      50347065011191293,
      21579496338166870,
      3380668174306445,
      33732523426331811,
      135913608210607781,
      164575269931903557,
      42163599542804245,
      92317792821805150,
      117472307714712089
    ]
  },
  "extraction_warnings": [
    "normalized unsupported entity type 'model' for 'two-mass-two-spring system'"
  ]
}

Previous KU: The text analyzes a two-spring model to explain fine structure in atomic stick-slip motion during Friction Force Microscopy. It demonstrates that tip apex delocalization occurs when the effective tip mass is sufficiently low, causing rapid thermally activated motion. This behavior contrasts with the traditional single-spring model and provides insights into macroscopic friction origins.

Next KU: The text defines a one-dimensional two-mass-two-spring system where the tip apex moves rapidly relative to the cantilever. It establishes a hierarchy of frequencies and uses a Langevin-Monte-Carlo scheme to model cantilever motion and thermally activated tip jumps. The model assumes a sinusoidal tip-surface interaction and neglects direct cantilever damping.

KU 3 · source words 993–1,447

8 entities · 13 relationships · 2 preceding KUs available during extraction

Recorded context summary

The text defines a one-dimensional two-mass-two-spring system where the tip apex moves rapidly relative to the cantilever. It establishes a hierarchy of frequencies and uses a Langevin-Monte-Carlo scheme to model cantilever motion and thermally activated tip jumps. The model assumes a sinusoidal tip-surface interaction and neglects direct cantilever damping.

one-dimensional geometry system

other · ID: one_dimensional_geometry_system

potential_energy_components: cantilever coordinate X, tip apex coordinate x, support position Vt, cantilever stiffness K, tip stiffness k
tip_surface_interaction: sinusoidal
interaction_amplitude: U0
interaction_period: a
interaction_potential_formula: Us = U0/2 [1 - cos(2πx/a)]
model_entity_type: physical_model

Relationships

described_by → two coupled equations of motion

cantilever+tip combination

other · ID: cantilever_tip_combination

position: X
mass: M
model_entity_type: subsystem

Relationships

governed_by → Langevin-type equation
coupled_to → tip apex

tip apex

other · ID: tip_apex

position: x
effective_mass: m
characteristic_frequency: νt
model_entity_type: subsystem

Relationships

moves_relative_to → cantilever
moves_relative_to → surface
frequency_hierarchy → νt ≫ νc

Tomlinson parameter

measurement · ID: tomlinson_parameter

symbol: γ
formula: 2π^2 U0 k a^2 / K

Relationships

determines → number of wells available to the apex
condition_for_multiple_wells → γ > 1

transition state theory approximation

method · ID: transition_state_theory_approximation

jump_rate_formula: rij = νt exp(-Uij / kBT)

Relationships

describes → thermally activated jumps of the tip apex between wells

Langevin-type equation

other · ID: langevin_type_equation

formula: M••X = -k[X - xi(X)] - K(X - Vt) - Mη•X + ξ
model_entity_type: equation

Relationships

describes_motion_of → cantilever
combined_with → Monte-Carlo algorithm

random force

other · ID: random_force

symbol: ξ
normalization: ξ(t)ξ(t') = 2Mηn kBT δ(t-t')
model_entity_type: variable

Relationships

governed_by → fluctuation-dissipation theorem

damping

other · ID: damping

cantilever_damping: neglected
coupling_mechanism: indirect via tip apex motion
model_entity_type: physical_property

Relationships

varied_in_calculations → η and ηn

Source positions, MinHash and extraction warnings

{
  "source": {
    "chunk_index": 2,
    "start_word": 992,
    "end_word": 1447,
    "word_count": 455,
    "sha256": "c188fe3ee3ae3bb56a1cb6e667987d7d78d393b724bf3acefa89088154037bbe",
    "sentence_minhash": [
      82316180561614159,
      1306423125707224,
      4901304760856621,
      148613333131239159,
      99441767708229822,
      120624748091028973,
      164480005983286773,
      1125529973969978,
      19874090017850400,
      3380668174306445,
      67831053780325945,
      7578552932006974,
      11610845633202285,
      14638101201935915,
      159289067325148646,
      382712784620362330
    ]
  },
  "extraction_warnings": [
    "normalized unsupported entity type 'physical_model' for 'one-dimensional geometry system'",
    "normalized unsupported entity type 'subsystem' for 'cantilever+tip combination'",
    "normalized unsupported entity type 'subsystem' for 'tip apex'",
    "normalized unsupported entity type 'equation' for 'Langevin-type equation'",
    "normalized unsupported entity type 'variable' for 'random force'",
    "normalized unsupported entity type 'physical_property' for 'damping'"
  ]
}

Previous KU: The text analyzes a two-mass-two-spring system where an ultra-low tip mass leads to contact delocalization and complex slip dynamics. A hybrid Langevin-Monte-Carlo scheme reveals that rapid tip motion is not averaged out by the cantilever, creating distinct observable regimes. These findings explain the 'fine structure' of slip events observed in high-resolution experiments, contradicting the 'multiple nanotips' hypothesis.

Next KU: The study uses a two-mass-two-spring model with specific parameters to simulate atomic-scale friction, including a tip mass of 10^-20 kg and a cantilever mass of 5.5*10^-11 kg. It identifies distinct slip regimes based on surface corrugation, ranging from trivial slips at high corrugation to smoothened stochastic behavior at low corrugation. The model reveals that at intermediate corrugations, the tip apex experiences a double-well potential, leading to complex slip dynamics.

KU 4 · source words 1,448–1,922

10 entities · 15 relationships · 3 preceding KUs available during extraction

Recorded context summary

The study uses a two-mass-two-spring model with specific parameters to simulate atomic-scale friction, including a tip mass of 10^-20 kg and a cantilever mass of 5.5*10^-11 kg. It identifies distinct slip regimes based on surface corrugation, ranging from trivial slips at high corrugation to smoothened stochastic behavior at low corrugation. The model reveals that at intermediate corrugations, the tip apex experiences a double-well potential, leading to complex slip dynamics.

slightly overdamped motion case

measurement · ID: slightly_overdamped_motion_case

damping_coefficient_eta: 5*nu_c
noise_reduction_factor: sqrt(10)
noise_amplitude_eta_n: 0.5*nu_c

Relationships

visualizes → fine structure of slip events
qualitatively_consistent_in_range → 0.1*nu_c < eta < 10*nu_c

tip apex mass (m)

measurement · ID: tip_apex_mass_m

value: 1 * 10^-20 kg
source: Ref. [10]

Relationships

used_in → Fig. 1 calculations

experimental parameters from Ref. [9]

measurement · ID: experimental_parameters_from_ref_9

lattice_constant_a: 0.66 nm
cantilever_stiffness_K: 62 N/m
velocity_V: 25 nm/s
temperature_T: 300 K
cantilever_mass_M: 5.5 * 10^-11 kg

Relationships

used_in → Fig. 1 calculations

tip stiffness (k)

measurement · ID: tip_stiffness_k

value: 3 N/m
source: best fit to experimental stick-slip patterns at high corrugations
typical_range: several N/m

Relationships

used_in → Fig. 1 calculations

surface corrugation (U0)

measurement · ID: surface_corrugation_u0

corresponds_to: changing scan lines in experiment

Relationships

determines → slip regimes

high surface corrugation regime

concept · ID: high_surface_corrugation_regime

jump_probability: low

Relationships

exhibits → trivial slips
slip_time_scale → nu^-1_c

somewhat lower corrugation regime

concept · ID: somewhat_lower_corrugation_regime

jump_rate: larger

Relationships

exhibits → apex jumps back and forth between wells
exhibits → cantilever jumps

lower corrugation regime

concept · ID: lower_corrugation_regime

cantilever_response: cannot follow rapid jumps of tip apex

Relationships

exhibits → smoothened stochastic behavior

intermediate corrugation regime

concept · ID: intermediate_corrugation_regime

gamma_value: near unity

Relationships

exhibits → gradual slips
exhibits → slips with intermediate state
involves → double-well potential

double-well potential

concept · ID: double_well_potential

condition: a cantilever that is located in the middle between the grid points (X = a/2, 3a/2, ...)
barrier_height: considerably lower than surface corrugation U0

Relationships

causes → very high rate of thermally activated jumps

Source positions, MinHash and extraction warnings

{
  "source": {
    "chunk_index": 3,
    "start_word": 1447,
    "end_word": 1922,
    "word_count": 475,
    "sha256": "9f05a20d8ad93fa1ad8bce5ec8916575070352077b028c28e64b6b59ba624506",
    "sentence_minhash": [
      82316180561614159,
      232593725413697090,
      110182565901905120,
      61919449716151556,
      99441767708229822,
      62667647458868521,
      164480005983286773,
      41678443202000680,
      228439795799410229,
      67286569826781287,
      78280491562202942,
      142723333974471510,
      91759520063933247,
      14638101201935915,
      37122965930226008,
      117472307714712089
    ]
  },
  "extraction_warnings": []
}

Previous KU: The text defines a one-dimensional two-mass-two-spring system where the tip apex moves rapidly relative to the cantilever. It establishes a hierarchy of frequencies and uses a Langevin-Monte-Carlo scheme to model cantilever motion and thermally activated tip jumps. The model assumes a sinusoidal tip-surface interaction and neglects direct cantilever damping.

Next KU: In the two-well regime, the tip apex delocalizes due to rapid thermal jumps, causing the cantilever to experience an effective potential based on the mean apex position. This effective potential is flattened and the mean force is reduced because rapid oscillations of the instantaneous force average out. The transition from one to two potential states occurs smoothly over a period of time that is related to the jump rate and influences the observed sliding dynamics.

KU 5 · source words 1,923–2,384

7 entities · 12 relationships · 4 preceding KUs available during extraction

Recorded context summary

In the two-well regime, the tip apex delocalizes due to rapid thermal jumps, causing the cantilever to experience an effective potential based on the mean apex position. This effective potential is flattened and the mean force is reduced because rapid oscillations of the instantaneous force average out. The transition from one to two potential states occurs smoothly over a period of time that is related to the jump rate and influences the observed sliding dynamics.

two-well interval

other · ID: two_well_interval

mean_jump_rate: > 0.5 * 10^9 Hz
characteristic_frequency_comparison: high above cantilever frequency νc
model_entity_type: regime

Relationships

causes → tip apex delocalization
results_in → flattened effective potential
results_in → reduced mean surface force

tip apex

other · ID: tip_apex

motion_type: rapid jumps back and forth between two wells
delocalization_cause: high jump rate
model_entity_type: component

Relationships

delocalized_by → rapid thermal motion
mean_position_defined_as → x(X) = x1p1 + x2p2

cantilever

other · ID: cantilever

perceived_motion: moves in effective potential formed by mean tip apex position
model_entity_type: component

Relationships

experiences → effective potential Ueff(X)
experiences → mean surface force Fs(X)

effective potential Ueff(X)

concept · ID: effective_potential_ueff_x

calculation_method: integral of mean force Fs(X)
shape_in_two_well_regime: flattened at top, may have shallow minimum

Relationships

flattening_cause → competition between potential energy increase and entropy increase

mean surface force Fs(X)

measurement · ID: mean_surface_force_fs_x

definition: mean force exerted on cantilever by bending tip
behavior_in_two_well_regime: essentially reduced

Relationships

reduction_cause → rapid oscillations of instantaneous force
exhibits → discontinuities at one-well to two-well transitions

one-well to two-well transition

event · ID: one_well_to_two_well_transition

temporal_scale: smooth over time of order r^-1
physical_cause: establishing equilibrium population of two wells

Relationships

causes → discontinuities in mean surface force

slip dynamics

other · ID: slip_dynamics

gradual_slip_cause: gradual change in mean surface force
step_like_slip_cause: nearly zero mean surface force in intermediate state
model_entity_type: phenomenon

Relationships

observed_in → Fig. 1-h and Fig. 1-i

Source positions, MinHash and extraction warnings

{
  "source": {
    "chunk_index": 4,
    "start_word": 1922,
    "end_word": 2384,
    "word_count": 462,
    "sha256": "3d5d872561fa4c681ad071808e560309cf2e30e563f3305fe07e80f1dbb57b09",
    "sentence_minhash": [
      542989839357426248,
      18551641988871988,
      6687337363432560,
      139282502133510779,
      99441767708229822,
      99436724310786061,
      149017575652778032,
      50347065011191293,
      25627064558161218,
      92715222163426349,
      67831053780325945,
      30828592349773787,
      51125582506972287,
      62445563022006556,
      98254322503569589,
      205893516960207536
    ]
  },
  "extraction_warnings": [
    "normalized unsupported entity type 'regime' for 'two-well interval'",
    "normalized unsupported entity type 'component' for 'tip apex'",
    "normalized unsupported entity type 'component' for 'cantilever'",
    "normalized unsupported entity type 'phenomenon' for 'slip dynamics'"
  ]
}

Previous KU: The study uses a two-mass-two-spring model with specific parameters to simulate atomic-scale friction, including a tip mass of 10^-20 kg and a cantilever mass of 5.5*10^-11 kg. It identifies distinct slip regimes based on surface corrugation, ranging from trivial slips at high corrugation to smoothened stochastic behavior at low corrugation. The model reveals that at intermediate corrugations, the tip apex experiences a double-well potential, leading to complex slip dynamics.

Next KU: The study identifies that single-slip behavior occurs at both high and very low surface corrugations due to the narrowness of the two-well interval. Comparison with experimental data confirms the predicted fine structure and lateral force ranges, though experimental slip durations are longer, suggesting non-sinusoidal surface potentials. Simulations indicate the effective tip mass is less than 10^-18 kg, as larger masses suppress the intermediate states characteristic of contact delocalization.

KU 6 · source words 2,385–2,866

7 entities · 8 relationships · 5 preceding KUs available during extraction

Recorded context summary

The study identifies that single-slip behavior occurs at both high and very low surface corrugations due to the narrowness of the two-well interval. Comparison with experimental data confirms the predicted fine structure and lateral force ranges, though experimental slip durations are longer, suggesting non-sinusoidal surface potentials. Simulations indicate the effective tip mass is less than 10^-18 kg, as larger masses suppress the intermediate states characteristic of contact delocalization.

single-slip behavior

other · ID: single_slip_behavior

occurrence_conditions: high surface corrugation and very low surface corrugation
cause_at_low_corrugation: narrow interval of cantilever positions for two surface wells
model_entity_type: phenomenon

Relationships

reproduced_in → recent observations Ref. [9]

recent observations Ref. [9]

other · ID: recent_observations_ref_9

data_reproduction: one-to-one reproduction of fine structure in slip events
lateral_force_range: remarkably good correspondence with simulations
model_entity_type: experiment

Relationships

discrepancy_with → simulated slip durations
nature
experimental durations are larger

simulated slip durations

measurement · ID: simulated_slip_durations

comparison_to_experiment: shorter than experimental durations

Relationships

suggests → non-sinusoidal surface potential

non-sinusoidal surface potential

concept · ID: non_sinusoidal_surface_potential

characteristics: wider barriers and narrower wells
effect_on_slip: increased slip duration
effect_on_force: increased maximum lateral force for same corrugation

Relationships

encountered_in → Ref. [14]

effective tip mass (m)

measurement · ID: effective_tip_mass_m

upper_estimate: < 10^-18 kg
sensitivity: slips with intermediate state disappear if m increases by two orders of magnitude

Relationships

contrasts → earlier expectations [7, 9]
agrees_with → recent calculations [10]

slips with intermediate state

other · ID: slips_with_intermediate_state

significance: most specific slips
relation_to_delocalization: directly related with complete delocalization of contact
model_entity_type: phenomenon

Relationships

criterion_for → very small effective mass

stuck-in-slipperiness

other · ID: stuck_in_slipperiness

predicted_in: Ref. [10]
condition: soft cantilever
model_entity_type: friction_regime

Relationships

part_of → variety of different regimes of friction

Source positions, MinHash and extraction warnings

{
  "source": {
    "chunk_index": 5,
    "start_word": 2384,
    "end_word": 2866,
    "word_count": 482,
    "sha256": "c56e239be856df14ed7561630fa704c51bca57bdfb6aa8ce53c76f9799ca4d2e",
    "sentence_minhash": [
      181103902342795345,
      1306423125707224,
      152402704048383776,
      89647839879950313,
      72424486488803959,
      62667647458868521,
      23718652799488495,
      65918950900603172,
      96635883400075078,
      92715222163426349,
      78280491562202942,
      142723333974471510,
      157018458019500101,
      906306679132868,
      92317792821805150,
      117472307714712089
    ]
  },
  "extraction_warnings": [
    "normalized unsupported entity type 'phenomenon' for 'single-slip behavior'",
    "normalized unsupported entity type 'experiment' for 'recent observations Ref. [9]'",
    "normalized unsupported entity type 'phenomenon' for 'slips with intermediate state'",
    "normalized unsupported entity type 'friction_regime' for 'stuck-in-slipperiness'"
  ]
}

Previous KU: In the two-well regime, the tip apex delocalizes due to rapid thermal jumps, causing the cantilever to experience an effective potential based on the mean apex position. This effective potential is flattened and the mean force is reduced because rapid oscillations of the instantaneous force average out. The transition from one to two potential states occurs smoothly over a period of time that is related to the jump rate and influences the observed sliding dynamics.

Next KU: The text describes how contact delocalization can occur at any cantilever position, necessitating a reconsideration of lateral force amplitude, slip times, and thermal noise in FFM measurements. It identifies rapid tip apex motion in the GHz range as the key element for energy dissipation, which occurs via intratip vibration damping or apex-substrate motion damping. The findings suggest that thermally driven dynamics from local surface compliance may influence macroscopic sliding friction.

KU 7 · source words 2,867–3,254

9 entities · 5 relationships · 6 preceding KUs available during extraction

Recorded context summary

The text describes how contact delocalization can occur at any cantilever position, necessitating a reconsideration of lateral force amplitude, slip times, and thermal noise in FFM measurements. It identifies rapid tip apex motion in the GHz range as the key element for energy dissipation, which occurs via intratip vibration damping or apex-substrate motion damping. The findings suggest that thermally driven dynamics from local surface compliance may influence macroscopic sliding friction.

contact delocalization

concept · ID: contact_delocalization

occurrence: can occur at any cantilever position
implication: requires reconsideration of lateral force amplitude, slip times, and thermal noise

Relationships

affects → FFM measurements

tip apex motion

other · ID: tip_apex_motion

characteristic_frequency: GHz range
role: key element in energy dissipation
model_entity_type: physical_process

Relationships

dissipates_energy_via → damping of intratip vibrations
dissipates_energy_via → damping of apex motion with respect to substrate

damping of intratip vibrations

other · ID: damping_of_intratip_vibrations

consequence: creation of phonons inside the tip
model_entity_type: physical_process

Relationships

No relationships recorded.

damping of apex motion with respect to substrate

other · ID: damping_of_apex_motion_with_respect_to_substrate

consequence: creation of phonons in substrate and tip
model_entity_type: physical_process

Relationships

No relationships recorded.

macroscopic sliding

other · ID: macroscopic_sliding

mechanism: thermally driven dynamics due to local compliance of contacting surfaces
model_entity_type: physical_process

Relationships

influenced_by → contact delocalization

atomic stick-slip

other · ID: atomic_stick_slip

regime: high and moderate surface corrugation
model_entity_type: physical_process

Relationships

No relationships recorded.

continuous sliding

other · ID: continuous_sliding

regime: low corrugation
model_entity_type: physical_process

Relationships

No relationships recorded.

surface corrugation values

measurement · ID: surface_corrugation_values

stick_slip_values: 1.2, 0.48, 0.3 eV
slip_event_values: 1.2, 1.0, 0.9, 0.7, 0.52, 0.48, 0.43, 0.42 eV

Relationships

No relationships recorded.

simulation parameters

measurement · ID: simulation_parameters

tip_mass_m: 10^-20 kg
thermal_noise_eta_n: 0 in case (j)

Relationships

source → Ref. [9]

Source positions, MinHash and extraction warnings

{
  "source": {
    "chunk_index": 6,
    "start_word": 2866,
    "end_word": 3254,
    "word_count": 388,
    "sha256": "370f10e1689b59f0611853922a8207ea8260adb6f38bed183de61cffee25718e",
    "sentence_minhash": [
      181103902342795345,
      1306423125707224,
      61896554882702054,
      159448631219318875,
      50154285776315358,
      62667647458868521,
      175774020269814206,
      50347065011191293,
      64333332902950267,
      92715222163426349,
      59581572940983686,
      127332288920535677,
      164575269931903557,
      14638101201935915,
      423009623579688101,
      91498461405850096
    ]
  },
  "extraction_warnings": [
    "normalized unsupported entity type 'physical_process' for 'tip apex motion'",
    "normalized unsupported entity type 'physical_process' for 'damping of intratip vibrations'",
    "normalized unsupported entity type 'physical_process' for 'damping of apex motion with respect to substrate'",
    "normalized unsupported entity type 'physical_process' for 'macroscopic sliding'",
    "normalized unsupported entity type 'physical_process' for 'atomic stick-slip'",
    "normalized unsupported entity type 'physical_process' for 'continuous sliding'"
  ]
}

Previous KU: The study identifies that single-slip behavior occurs at both high and very low surface corrugations due to the narrowness of the two-well interval. Comparison with experimental data confirms the predicted fine structure and lateral force ranges, though experimental slip durations are longer, suggesting non-sinusoidal surface potentials. Simulations indicate the effective tip mass is less than 10^-18 kg, as larger masses suppress the intermediate states characteristic of contact delocalization.

Next KU: End of paper